Description
Polyester injection mortar, for both solid and hollow substrates. Fast setting.
Physical fitness: Solid.
Color: Resin: Beige. Hardener: Black
Smell: Characteristic
Goo: 3.5 x 10 6< P 20ºC (component A)
Density: 1.8 g/cm3 20ºC (component A)
1.6 g/cm3 20ºC (component B)
| Code | Presentation | Content |
|---|---|---|
| IT010TSE | Cartridge | 300 ml |
| IT010TCA | Mixing Cannula | |
| IT010TA8 | Sieve 12×50 |
– Unscrew the cartridge cap.
– Screw the mixing nozzle onto the component outlet hole.
– Place the cartridge in the gun.
– Apply pressure to the gun until the two components appear mixed with a homogeneous light grey colour in the nozzle (avoid using the first 10 ml).
– Choose a drill of appropriate dimensions depending on the rod to be anchored.
– Remove water and dirt (dust and loose parts) using a brush and blower or with compressed air.
– The parts to be anchored must be clean.
– If the anchor is to be made in a hollow support, insert the appropriately sized sieve (for brick: sieve 15×85, and for concrete block: sieve 15×130) and move the gun slightly outwards, each time the trigger is pressed.
– In the case of a solid support, inject the product from the bottom of the hole until it is 2/3 full.
– Insert the element to be anchored with a slight rotation movement, if necessary, hold it in position with a suitable device.
TECHNICAL SHEET
