Description
CHARACTERISTICS
- Very fast
- Thixotropic
- Fill joints
SUITABLE FOR:
For joining pipes, sleeves and fittings with a push-fit and looser fit (filling gaps) in pressure and drainage systems. With special brush for quick and easy application. Extremely suitable for flexible hoses and applications under wet conditions, e.g. swimming pools, whirlpools. Suitable for diameters ≤ 160 mm. Max. 16 bar (PN 16). Maximum tolerance 0.8 mm with a loose fit (flexible hoses max. 0.3 mm) / 0.2 mm with a push-fit. Suitable for, among others, pipe systems in accordance with EN 1329, 1452, 1453, 1455 and ISO 15493 (PVC).
BEFORE USE
APPLICATION CONDITIONS
Do not use at temperatures ≤ +5°C.
CONSUMPTION
Indication of the number of unions per 1 L:
DURING USE
DIRECTIONS FOR USE
1. Cut the pipes at right angles, chamfer and deburr. 2. Clean the surfaces before bonding with Griffon Cleaner and Cleaner Cloth. 3. Apply the adhesive quickly and evenly lengthwise to both surfaces (thick layer on the pipe, thin layer on the sleeve). 4. Assemble the joint immediately. Remove excess adhesive. Do not subject the joint to mechanical stress for the first 10 minutes. Close the container tightly immediately after use.
POINTS OF ATTENTION
The size of the brush varies depending on the volume of the container. Use a suitable container (brush) with the diameter to be glued.
AFTER USE
STAINS/REMOVES
Remove adhesive stains with Griffon Cleaner and Cleaner Cloth.
